Product presentation · Confirm configuration with your quotation
KES / Body contouring
MED-360 Body Care Equipment Manufacturer
Specify MED-360 clearly in your body and skin care equipment enquiry. Review the published RF, delivery, pump and cooling entries, then build an itemized purchasing brief around the configuration and documentation your business needs.
View specifications ↓For distributors and professional procurement.
Share your destination market when you enquire.
Share your destination market when you enquire.
Technical specifications
| Radio Frequency Power | Up to 50W |
|---|---|
| Delivery Type | Pulse;CW |
| RF Frequency | 10MHz |
| Pump Suction Rate | 25cub.m/h |
| Cooling | Self-contained |
Options and order-specific details should be confirmed in the final quotation.
Start with the exact MED-360 product identity
MED-360 is the identifier for this body and skin care equipment enquiry. Put that identifier on your request and ask for the same model designation on the proposed specification, quotation and packing list. If you are discussing several products, keep their records separate. A photograph or a shortened product description should not be the only link between your purchasing brief and the equipment being offered.
Begin by explaining the type of purchase you are planning. You might be evaluating an individual machine, preparing a demonstration purchase or exploring a distributor order. State the destination and the proposed quantity, and describe the documents your organization needs to review. Ask for current photographs of the exact equipment and its proposed accessories. This creates a focused conversation about the supplied product. It also leaves room to establish commercial terms and installation requirements without assuming that a general product page contains every detail needed to approve the purchase.
Keep the RF specification attached to its original field
The published radio-frequency power entry for MED-360 is Up to 50 W, with an RF frequency of 10 MHz. The delivery-type entry lists Pulse and CW. These are the available specification fields to use in your technical enquiry. Ask for the current documentation to explain how the fields apply to the actual equipment in the quotation and how they are presented on the supplied interface.
For procurement, it is useful to keep the power, frequency and delivery-type questions separate. Ask your technical reviewer which details must be confirmed before the machine can be considered for your business. You can request the applicable operating documentation, photographs of the relevant controls and clarification of any terminology used in the offer. Avoid translating a power rating or a frequency into an outcome promise. The figures describe published equipment entries; they do not establish suitability for a particular person or a result that your business can advertise. Any later sales description should remain consistent with the configuration you actually agree to purchase.
Ask precise questions about the pump and cooling entries
The pump suction rate is published as 25 cub.m/h, and the cooling entry is Self-contained. Preserve the pump field and its unit when asking for clarification. If your purchasing checklist also asks about pressure, accessory-specific operation or maintenance requirements, request those details directly. Do not substitute a pump-flow entry for a different measurement that the page does not establish.
The same approach applies to cooling. Ask what the supplier means by self-contained for the quoted MED-360 configuration and which setup checks are required. Request the documentation that describes positioning, inspection and any preparation before use. If you need a particular operating schedule for your business, present it as a requirement to be assessed rather than a capability already confirmed by this page. You can also ask which items, if any, need to be obtained locally. Record the answers in the technical review so that the person receiving the equipment has the same information as the person who approved the order.
Review the physical package before planning your room
Request a current dimensional drawing, net and packed weights, and photographs showing the equipment from more than one side. These details are not established by the specification entries reproduced here. If you have a planned location, provide the relevant site information and ask for the installation guidance that applies to the offered machine. Keep questions about electrical supply, placement and accessory storage on the same request so that none are left to assumptions at delivery.
Ask the supplier to identify each handpiece, cable and other accessory included in the proposed package. Your team can then review the list against photographs and the quotation. If an item appears in a promotional image, ask whether it is actually included and how it will be described on the packing list. Where your business needs extra accessories, request separate identifiers and pricing. Do not infer the number of included handpieces from a product-family name. A complete package list should be specific enough for the receiving team to distinguish the purchased items from optional or illustrative material.
Organize an equipment evaluation around your own requirements
Prepare an evaluation brief before requesting a demonstration. For MED-360, the brief can ask the supplier to show the model identification, explain the published RF entries and identify the components in the quotation. Request the documents your technical reviewer would need to assess the equipment. Agree the format of the review and the scope of any demonstration in advance, including whether it concerns a sample, a proposed configuration or the unit intended for supply.
Use the review to resolve purchasing questions, not to create an unsupported guarantee of results. Your team may want clarification of interface language, accessory labeling, the supplied instructions or the procedure for asking technical questions after delivery. Write down those requirements and request a response against each one. If an answer remains open, retain it as an open item in the purchasing record. This approach makes it possible to continue the commercial discussion while keeping unresolved technical questions visible to the people responsible for the final decision.
Build a meaningful shortlist within body care equipment
Use a separate worksheet for each item in your body-contouring or skin-care shortlist. For this MED-360 page, the confirmed headings are RF power up to 50 W, RF frequency 10 MHz, Pulse/CW delivery type, the published pump suction-rate entry and self-contained cooling. Other fields should remain questions until you receive a model-specific answer. Do not complete a missing line with a value taken from another product or a similarly named listing.
Your shortlist can also compare the completeness of the proposed offer. Has the supplier identified the accessories? Is the documentation language clear? Are installation questions answered? What commercial and service conditions have been provided in writing? These are useful purchasing comparisons even before every technical question has been resolved. If a choice depends on a particular component or operating requirement, explain that requirement explicitly and ask for confirmation. Keep the supporting response with the relevant model record. A careful shortlist records what is known and what still needs verification without assigning unsubstantiated advantages to any option.
Send a focused branding or distribution brief
For an OEM/ODM enquiry, describe the exact changes you would like considered for MED-360. You can ask about proposed artwork placement, packaging presentation and documentation language, but availability and conditions need a written response. Supply the relevant files and explain the destination for the proposed equipment. Request an approval process for any agreed artwork before it is treated as part of the order. Keep branding requests separate from changes to the technical specification.
A distribution enquiry can include anticipated order quantities, the intended sales channel and the information you require for a product listing. Ask which photographs and technical descriptions may be used for the configuration under discussion. Before publishing your own page, compare it with the agreed specification and remove statements that have not been confirmed. In particular, do not turn the listed RF or pump entries into promises about clinical outcomes, business revenue or guaranteed appointment capacity. Your initial enquiry can focus on a clear supply package and the documentation needed for your own commercial review.
Request the commercial and service details in writing
Once your configuration questions are organized, request an itemized MED-360 quotation. Ask it to identify the equipment, included accessories, separately priced items, destination-related arrangements and the proposed commercial terms. Request quotation validity and an explanation of any information still required from you. A product listing does not establish a delivery date, payment arrangement or warranty period; these should be addressed in the offer relevant to your order.
Also ask how technical enquiries would be handled after delivery. Your request can cover the contact route, information required for issue reporting, the identification of replacement components and any proposed training or assistance. Ask which services are included and which would be quoted separately. Before committing, make sure your procurement contact, technical reviewer and receiving team can all access the agreed specification and package list. To start the conversation, send the complete model name, your destination and quantity, then attach the questions that matter most to your intended purchase.
Before you enquire
Questions, answered.
What RF specifications are published for MED-360?
The source lists radio-frequency power up to 50 W and RF frequency of 10 MHz. The delivery-type entry is Pulse; CW. Use these named fields in your technical enquiry and ask for the documentation that applies to the quoted configuration. They should not be converted into an unverified promise about treatment outcomes or operating performance in your particular setting.
Is the pump entry a pressure specification?
The published field is Pump Suction Rate, shown as 25 cub.m/h. If pressure or another pump characteristic is important to your procurement review, request that measurement and its relevant conditions separately. Keep the original field name and unit in your comparison sheet rather than substituting a different measurement or borrowing a number from another product page.
What does the page establish about cooling?
The cooling entry is Self-contained. Ask for the exact setup and inspection guidance for the equipment being quoted. Your purchasing team can request clarification of positioning requirements and any preparation or locally supplied items. Do not infer a maintenance interval, installation condition or continuous operating allowance from that short specification description alone.
Can I obtain a complete accessory list before ordering?
Include that request in your enquiry. Ask the supplier to identify the proposed handpieces, cables and other package items, with photographs and separate lines for optional additions. Compare the resulting list with the quotation and keep it with your order records. The specification fields on this page do not establish a complete delivered accessory inventory.
What should a distributor include in the first message?
Name MED-360, give the destination and proposed quantity, and describe the documentation and accessory information you need. If you are considering branding, attach a separate brief. Ask for technical clarification, an itemized offer and written service conditions. Keep your initial stock request distinct from future plans so that the quotation addresses a clear, reviewable purchase.
Keep exploring
Explore category →In the same collection.
Your next equipment project
Let’s build your shortlist.
Tell us your market, preferred model and configuration questions.